Color on screen may vary from actual product

3E Z SYSTEM AG52F


Place Order

Category:

Product Description

Model 3EZ Steps Hot Air Bander
Bands up to 2 inch wide board; adjustable rubber clamps hug the board & provide accurate tracking of tape on the board. The three tools enable you to do complete, accurate manual edgebanding as follows:

Apply the pre-glued tapes: Wood Veneer, PVC, Melamine, Polyester.
Flush trim both sides at the same time.
Flush trim both ends of the board.**Most accurate bander in its price range.

Hand Held, Manual Hot Air Edge Bander

Model AG-98
For pre-glued PVC, Polyester, Melamine, and wood veneer of up to 2″ wide (50 mm). A set of rubber clamps hug the board so you can get the most accurate tracking of the tape on the board. Easy to adjust. Easy application on contour edge banding. Minimum interior radius: 1″

  • Two-step temperature switch: Step one – 300ºC (570ºF); Step two – 525ºC (1,000ºF).
  • Air delivery: 400 L/min. or 16 CV. feet/min.
  • Set up time of less than one minute.
  • Weight: 6 Pounds(2.7 Kg).
  • 110V, 50/60Hz, 1,500W

Double Edge Trimmer

Model AG-93
Trims both sides of the board simultaneously so you can cut your trimming time in half.

  • For edges up to 1.5″ or 40 mm wide.
  • For wider edges, it can be used as two independent one side trimmer.
  • AU93B: Set of extra hardened long lasting spare blades.
Product Line: All
Product Number: T-AG98
EdgeCo Number:
Size:

Additional Information